Chevrolet Silverado lift kits contain all of the tools that you’ll be needing when lifting your vehicle. They help you increase the overall height of your Chevrolet while providing you with a little extra ground clearance at the same time. Lift kits also help you improve visibility while driving and they allow the truck to accommodate bigger tires.
There are lift kits that give you more clearance so that you can drive over uneven terrain without dragging the body of your truck. If you plan to do some off-roading, or just want to give your pickup truck a good-looking look, finding the perfect lift kit according to your needs shall make your truck much more useful for you.
I previously shared with you a few tips and tricks I learned about how to choose the best lift kits for your Chevy Silverado truck. As we have reached the end of the process, it is now time for you to move on and make your final decision!
It is my intention to assist you in the selection of the best product for your needs by sharing the following information with you in this post.
3” Front Leveling Lift Kit
Apparently, a kit for lifting the front end of the Chevrolet Silverado by 3 inches is a good fit for this truck. There is nothing difficult about its installation since it can be completed in less than two hours and doesn’t require special tools or anything like that.
The lift kit is made from billet aluminium that has been treated with T6 in order to give it more strength. There is a black anodized surface on the 12.9-grade bolts, which causes them to be corrosion-resistant. You can be sure that after your Chevrolet Silverado is installed, the CNC designed to provide proper balance will look great on the truck.
Moto Fab Lifts CH-3F-2R 3 in Front and 2 in Rear
A lifetime warranty and a 100% satisfaction guarantee accompany the strongest kit on the market.
All the materials in this kit were sourced within the United States. This product is very robust and strong, and it lasts for years. Rather than cast iron blocks, it uses fabricated lift blocks that are more durable. In comparison to solid Aluminum rear lift blocks, it is far more durable.
It is easy to install the kit. Installing it shouldn’t take more than two or three hours. With this kit, there is no need to disassemble the strut or coils. There are instructions and all the hardware needed in the package.
Front lift kits raise Sierras or Chevy Silverado by a full 3 inches. Two inches of lift is provided at the rear. When driving off-road, this clearance allows you to clear obstacles. A large part of the reason for this is the geometry of the suspension; suspension spacer thickness is not the same as the lift.
There is a direct fit for the 2007-2018 Chevrolet Pickups as well as the GM 1500. Having solid and robust lift blocks, it is capable of lifting heavy loads on the truck. The product is powder coated and made from aluminium billets that have been CNC machined. There is no doubt that the kit can be purchased for an affordable price.
Rough Country Lift Kit
A brand that is known for producing some of the best tools for the Chevrolet Silverado is Rough Country, so you can count on this lift kit to be excellent. As a result of the lift kit, your truck will be protected from damage and will perform better while maintaining a stylish appearance. When driving off-road, especially when traveling, increased ground clearance and premium shock absorbers make it easier to drive.
Yitamotor – 3 inch Front and 2 inch Rear Forged Strut Spacers
Leveling out the factory vehicle rake with this kit is the fastest and safest method. It provides more ground clearance while maintaining factory ride quality.
Aluminum billet 6061-T6 is used in its construction. The bolts are heat-treated and hardened to 10.9-grade upon installation. Corrosion is not a problem on the surface.
In contrast to steel spacers, which are heavy and not light, it is very strong and durable, despite being light.
Bolt-on installation makes installation of the kit very simple. All the hardware needed for installation is included in the package.
Preloading the strut is not required, and there is no requirement to cut or modify factory parts. It doesn’t take more than two hours to set up.
Larger wheels and tires can be used with it since it provides extra ground clearance. There is a 3 inch front lift and a 2 inch rear lift. Removing factory blocks is required when installing at the rear. Lift heights and lift kit thicknesses are not the same due to suspension geometry.
Maximized strength and safety are provided. All 2007 and newer GMC Sierra 1500s (2WD/4WD) except Classic models from 2007 are compatible with this kit. With enough loading capacity to support truck loads, it fits Chevy Silverado 1500 models from 2007 to 2019. A reasonable price tag is attached to it.
Dynofit 3″ Front Lift Kits
It is incredibly solidly constructed, and this aircraft billet aluminum has a very high strength so even if the truck is carrying the maximum load it does not bend or compress.
Aluminum billets have been forged from high quality T6 treated Aluminum billets for the construction of this kit. The bolts are made up of high-grade 12.9 Grades.
As the kit is anodized in black, it will resist corrosion thanks to its anodized surface. It has a high level of durability and is able to provide an excellent balance on the ground.
Because of the suspension geometry, the kit raises the truck’s front by approximately three inches regardless of how large the kit is. The length of a two-inch.
An expert should be contacted to install this kit as it is best to leave it in the hands of an expert. There must be proper alignment and setup in order for this to work. This can, however, be easily accomplished within an hour and a half
Despite its reasonable price, this kit is a great addition to any truck that needs to gain extra ground clearance. As far as GMC Sierra 2WD/4WD 2007, 2018, and Chevy Silverado 1500 2WD/4WD 2007, 2018, this kit is compatible.
A vehicle having extra ground clearance will be capable of clearing obstacles, especially while driving off-road
As a result, the vehicle will have a more sleek appearance, as the kit dramatically enhances this. This is a set of wheels that are designed to fit the 2007-2018 GMC Sierra 1500 with two door and four door configurations.
The manufacturer offers a wide range of options with regard to wheel lug nuts and spacers. Two front strut spacers are included in the package as well as the Pro shockproof box.