To change a worn-out axle nut, you need to replace it with a new one. A 2007 Dodge Ram 2500 has an axle nut that is one and 11/16 inches in diameter.
To remove it, you will need a 1-11/16-inch socket, which you can purchase from an automotive specialty tool store.
If you need a longer handle, you can also try using an impact driver to remove the old one.
You can buy a new axle nut at any auto parts store. Advance Auto Parts sells 12 different sizes of Spindle Lock Nuts for the 2014 Ram 2500 series.
You can purchase a single nut or a set of two nuts. You can also purchase one if you don’t need both halves. If you’re working on a repair yourself, you should check the manufacturer’s manual for the correct axle stud and nut size.
You can use a special tool to remove the nut from the front axle of your Dodge Ram 2500. It will take a specialty socket of around one and a half inches.
You can also use an impact driver to remove the nut. An impact driver is recommended to remove the nut. You’ll need an extra-large wrench to reach it properly. Alternatively, you can get the right tool for the job at a local car or truck parts store.
What size is axle nut on 2014 Ram 2500?
If you’ve gotten your truck to a point where you need to replace the axle nut, the 2014 Dodge Ram 2500 will have a 1-and-5/16-inch front axle nut.
Unlike the studs and bolts on older vehicles, the front axle flange is held in place by a nut.
This ring-shaped nut will require a specialized socket or impact driver to remove.
To determine what size your truck’s nut is, first measure the length from the axle to the rim.
If it is a stud-mount style flange, you’ll need to measure its width from the front wheel to the front frame rail.
Then measure from the center of the flange to the hub. If you have to adjust the nut on the rear, check the torque setting for that particular flange-mount nut.
The front axle nut on the 2014 Ram 2500 has a diameter of 42mm. The front axle nut is 11/16 inches in diameter, and the rear axle nut is 3/8 inch in diameter.
AWD trucks use a different size, so be sure to measure both before attempting to replace the nut. The studs on the Ram’s fender are the same size as the ones on other vehicles. The rear flange is the same size as the front, so you’ll need to take a look at your manual.
What size is axle nut on 2006 Dodge Ram 2500?
Your truck has a 36-mm front axle nut and a 40mm rear axle nut.
If you want to replace the nuts yourself, you need to purchase the correct ones for your truck.
The size of the lugs and the nut are important as they attach the wheels to the axle.
You must torque the lugs correctly or you will end up damaging the axle and wheel bearings.
You should buy a 36mm axle nut socket for your truck. This type of nut is extra deep and can fit various axle lengths.
It will also be easier to install the ring and pinion shaft on front-wheel-drive vehicles.
If you have a 32-mm nut socket, you can use it to tighten the nut. If you’re not sure what size to buy, you can use a 38-mm hex nut socket.
To remove and install the nut, use an axle nut socket. The size of this nut varies between trucks and you should be able to find one to fit your car.
The nut socket fits a standard 36-mm ring and a 32-mm hex. It’s also a good idea to check for loose nuts and use an air wrench. Using a torque wrench is a great way to ensure that the rig is securely fastened.
What size is the axle nut on a 2001 Dodge Ram 2500 4×4?
Your truck’s axle nut is the bolt that attaches the hub to the axle. The size of the nut is S3/16 to 3/18 of an inch, and you’ll need a 30-mm 12 point socket wrench to replace it.
A replacement ring and nut set can cost $2 to $14 at most automotive parts retail stores, and they’re readily available online as well. Whether you need to replace the nut or need a new nut, there are a variety of DIY options available.
Dana’s Tech Notes website has a helpful reference for Dana axles.
You can use these to find parts that fit your truck’s rear end. This part also includes a socket.
If your vehicle has a locking spindle, you can purchase a QU40118 locking spindle nut and lock wedge. It is made in the USA.
The size of the axle nut on a 2001 Dodge RAM 2500 4×4 is based on the vehicle’s driveline.
On older models, the nut may be too small for the hub to properly fit.
The nut should be the same size across the entire wheel axle. However, if the truck uses the same axle, you may have to replace both nuts. Then, you’ll need to replace the old ones.
What size is the axle nut on a 99 Dodge Ram 2500?
If you are replacing a rear axle on your truck, you may want to check the nut size. You can purchase a new one or reuse an old one.
Dan the Gear Man recommends buying new parts if you are unsure of the part’s size. You should also avoid reusing factory parts. You should consider buying used ones if you aren’t sure which one to buy.
To replace a worn out axle nut, you can purchase a new one. The dimensions of a 99 Dodge Ram 2500’s axle nut are S3/16-inch by 3/18-inch.
You can use a 30-mm 12-point socket wrench to remove the nut.
You can buy new ones for a fair price from retail auto parts stores.
If you’d like to have a professional install your wheels, you’ll need to pay anywhere from $50 to $240.
You should also check your transmission fluid. It should be replaced at 30,000 to 60,000 miles. A faulty transmission can cause jerks, hard shifts, and stuck gears.
You should also check the torque converter. If this part is worn out, you’ll have to replace it soon. A worn-out torque converter can lead to a headache. A 99 Dodge Ram 2500’s axle nut socket size is S3/16-inch.